Twin-pump dispensing
FT4000AP TwinIntegrated Fuel Management Dispenser
A true twin-pump system with two pumps, two meters and two motors, built for simultaneous dispensing and higher-throughput commercial sites.
2 pumpsSimultaneous integrated dispensing
8 pumpsMaximum pump-control capability
50–90 LPMPer integrated pump
Fueltek product range
What it is. What it does. Where it fits.
A clear overview of the product, its role within a Fueltek fuel management system, and the applications it is designed for.
01What is it?
A twin integrated fuel management dispenser with two pumps, two meters, two motors and two dispensing sides.
02What does it do?
It allows two managed dispenses at the same time and can be configured for the same fuel or different compatible products.
03Who normally uses it?
Busier depots, mixed-fuel sites and fleets that need two vehicles or operators to refuel without sharing one hose.
04What does it control?
Both internal pumps and compatible external pumps, with a stated maximum control capability of up to eight pumps in total.
05Where does it fit?
It becomes the central twin dispensing point, with both sides reporting through the wider Fueltek FMO installation.
Product overview
Control built for the site.
The FT4000AP Twin combines two independent pumping units with Fueltek fuel management. It can be configured as a single-sided or double-sided unit, and each side can use different access methods or dispense different products.
Key capabilitiesWhat the FT4000AP Twin provides
- Two pumps, two meters and two motors can operate simultaneously.
- Can control additional external pumps, with up to eight pumps controlled in total.
- Single-sided or double-sided configurations are available.
- Different access arrangements can be specified on each side.
- Supports same-product or mixed-product configurations such as diesel, gas oil and AdBlue.
- Reports can be scheduled to run automatically each day, week or month.
Flexible twin configurationFlexible twin configuration
Built around the site requirement.
- Different access devices can be fitted to each side.
- Numeric keypad and Datatag can be paired with fuel-card or QWERTY-style access on the opposite side.
- Each pump can operate at the same time.
Pump and meteringPump and metering
Two accurate integrated pumping systems.
- Each unit is 230 V single phase and belt driven with air separation.
- 50, 70 or 90 LPM options per pump.
- Four-piston displacement meters accurate to ±0.5%.
- Automatic cut-off nozzles and 3.6 metre steel-braided hoses supplied.
FMO reporting and communicationsFMO reporting and communications
Connected control for busy sites.
- Fueltek FMO reporting, stock control and access-device programming.
- GPRS, LAN/WAN, Bluetooth, Wi-Fi, RS232 and RS485 connectivity options.
- Non-volatile memory retains data during a power failure.
Technical information
Product specification.
Core configuration, construction and operating details taken from the supplied Fueltek product sheet. Final specifications can be confirmed for the exact site application.
Twin pump specification
- Pumping units
- Two belt-driven units with air separation
- Motors
- Two 230 V single-phase motors, each rated at 10 A
- Meters
- Two four-piston displacement meters, accurate to ±0.5%
- Pump speed
- 70 LPM standard; 50 and 90 LPM options
- Hoses and nozzles
- 3.6 m steel-braided hoses with automatic cut-off nozzles
- Cabinet
- Stainless steel with lockable front door
Dimensions and construction
- Overall height
- 1,590 mm
- Approximate footprint
- 780 mm wide × 640 mm deep
- Base fixing area
- Approx. 730 mm × 590 mm
- Display
- Backlit electronic LCD graphics display
- Period totaliser
- Up to 9,999,999 litres per system display
- Lifetime totaliser
- Up to 9,999,999 litres per system display
Original product information
View the full FT4000AP Twin product sheet.
The original two-page Fueltek PDF is included for the complete source layout, diagrams and product information.
Open PDF ↗
Product specifications and available options may be updated or tailored to the installation. Contact Fueltek to confirm the final configuration.